100A Inductive Current Clamp Price Class 0.2 13mm Clamping Size
Model XQ13-1 Inductive Current Clamp is suitable for 10A-100A cable
online measurement, it belongs to high performance testing field.
Current Clamp XQ13 clamps around the current carrying conductor to
perform noncontact current measurements while without interrupting
the circuit under test.
Features
Suitable for 10A-100A cable online measurement.
Holding wire diameter: φ13mm
Dimension: 52.5mm×136.5mm×28mm
Load capacity: ≤4Ω
Installation: clamp type
Output mode: lead output
Applications
Electric energy meter calibrator (on site)
Double clamp type ground resistance tester
Double clamp type phase volt-ampere meter
Digital multi-meter
Multi-function energy meter
Power quality analyzer
Matched instruments
Calibration instrument on site
Parameter
| Electrical parameters |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2% |
| Primary current | 0 - 100A AC |
| Secondary current | 0 - 100mA AC (customized) |
| Max. Cont. Input current | 120A |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 100mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 2V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) | 48 x 179 x 27 |
| Weight (g) | 280 |
| Holding wire diameter (mm) | φ13 |
| Max. jaw opening (mm) | 13 |
| Jaw color | Red, yellow, blue, green, black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
FAQ, following questions will help you to select the matched probe
for your applications.
1. Please determine if you are measuring AC or DC?
GFUVE XQ13-1 here is for AC measurement. If DC, will have other
models to suggest.
2. What is the maximum current you will measure?
XQ13-1 max current is 120A
3. What size conductor will you clamp onto? This parameter
determines the probe jaw size needed.
XQ13-1 can clamp conductor with diameter within 13mm
4. What type of probe output do you need or can you work with (mA,
mV, A, AC, etc.)?
XQ13-1 can customize output with mA, mV
5. What is the working voltage of the conductor to be measured?
GFUVE probes should be used below 600 volts
6. What type of termination do you need: jacks, leads or BNC?
XQ13-1 standard has 2.5meter leads. We can offer jacks or BNC… as
options.
7. If you cannot find information you need or would like
assistance, contact us today. We have designed many more probes
than those shown in this catalog, and we manufacture in Beijing,
China.
Photos
