TEST-630 Portable Multi-Phase Protection Relay Tester for Differential Protection device
The GFUVE TEST-630 is a versatile protective relay tester for
testing relays and schemes.
This power system simulator performs the simplest through the most
complex tests. Meeting all your protective relay testing needs, the
TEST-630 is available in different configurations.
Whether you need to test a specific component or test an entire
scheme, the TEST-630 is the proven solution to assess protection
system performance.
Its unique accuracy and reliability make the Test-630 ideal for
protection and measurement equipment manufacturers for research and
development, production and electric power company type testing.
The TEST-630 Portable Multi-Phase Protection Relay Tester is a
multipurpose, light-weight, field portable test set capable of
testing a wide variety of electro-mechanical, solid state and
microprocessor-based protective relays, motor overload relays, and
similar protective devices.
The unit can be operated either manually via the built-in Keyword,
or placed under full computer control via the GFUVE, Advanced
Visual Testing Software, or the GFUVE-software running on a PC. In
addition, with the open communication architecture, the unit can
also be used with third-party software programs such as National
Instruments LabVIEW™.
FEATURES
Performs standard relay calibration and verification testing of
high burden and microprocessor relays
Analog testing of 1A and 5A protection devices
Performs state simulation and transient testing
Tests 0.2-class metering CTs and transducers
Implements end-to-end testing of communications-based schemes with
GPS time syncing
Maximum of 12 sources (six voltage, six current) configurable for
bench testing and proof-of-concept testing for complicated relaying
schemes
Delivers full VA power with resistive, inductive and capacitive
loads at maximum current rating (6×30, 3×60, 1×180 amps)
Control all sources from a tablet device for basic, manual
protection testing
Select from a number of protective relay tester models that feature
varying power levels and complexity. Choose the best solution
according to your testing and budgetary requirements.
Rugged construction and proven state-of-the art design provide
laboratory accuracy with uncompromising field performance
Convenient front-panel display indicates active voltage/current
amplitudes and phase values during testing
High-precision measurements for energy meter and transducer testing
OVERVIEW
- 6 phase current output
- 6 phase voltage output
- 8 binary input, 4 binary output
- Accuracy more than 0.1%
TEST ITEM
- U/I test
- DC test
- Impedance characteristics
- Power direction test
- I-T test
- Differential relay
- Harmonic test
- Differential protection
- Distance protection
- Zero sequence protection
- Setting group test
- State sequence
- Synchronization test
- Special test
- Oscillation test
- Metering instrument
- Hardware checkout
- Low Voltage protection
- Fault Waveform Reproduction
PARAMETERS
| Electrical parameters |
|---|
| Power voltage | AC220V±10% or AC110V±10%, 50/60Hz±10% |
| Time measurement | 0.1ms-999999.999s |
| AC current output |
|---|
| Phase current output (effective value) | 6 x 0-30A |
| Maximum power output | 260VA/phase |
| Maximum parallel current output (effective value) | 0-180A |
Long-term allowable working value of phase current
(effective value) | >10A |
| Allowable working time of maximum current | >11s |
| Accuracy class | <±0.1% |
| AC voltage output |
|---|
| Phase voltage output (effective value) | 6 x 0-130V |
| Line voltage output (effective value) | 0-260V |
| Maximum power output | 70VA/phase |
| Accuracy class | <±0.1% |
| DC current output |
|---|
| Output range | -10 to 10A or 6 x 0 to ±10A |
| Maximum power output | 200VA |
| Accuracy class | <±0.1% |
| DC voltage output |
|---|
| Output range | 0-300V or 6 x 0 to ±130V |
| Maximum output power | 130VA |
| Accuracy class | <±0.1% |
| Binary input |
|---|
| Idle contact | 1-20mA, 24V (DC) |
| Electric potential contact | 250V/0.5A (DC) |
| Binary output |
|---|
| Idle contact | 250V/0.5A (DC) |
| Rated output |
|---|
| Frequency error | <±0.01Hz |
| Phase error | <±0.1% |
| Waveform distortion | <±0.3% (fundamental wave) |
| Time error | <40µs |
| Output frequency | 0-1050Hz |
| Superposed harmonic wave | 0-21times |
| Mechanical parameters |
|---|
| Dimensions (L×W×H) (mm) | 360x195x375 |
| Weight (kg) | 19.6 |
| Environmental conditions |
|---|
| Use range | 0°C to 45°C |
| Storage range | -25°C to 70°C |
| Phase angle |
|---|
| Range | 0° to 360° or -180° to 180° |
| Accuracy | 0.1° |
Photo
